UF Pro, Windstopper Lining

Kuvaus

UPGRADE YOU PANTS TO THERMAL GEAR

The UF PRO WINDSTOPPER Liner is the perfect add-on for your Striker or P-40 pants  in cold-weather environments. Easily connects to the pants via a zipper found along the outer edge. You’ll find that the additional thermal insulation they provide plus 100% protection against wind-chill are must-haves while operating in sub-zero temperatures.

FEATURES

MATERIALS

• WINDSTOPPER®: 100% PTFE membrane 100% Polyester flanel

WEIGHT

0,18 kg (size 34/S)

Size chart

STEP ONE: CHECK YOUR PANTS SIZE

The size of the lining depends on the size of your UF PRO pants. Your pants size is defined by width/length. If your pants size is for example 33/32, then this means that the width of your pants is 33 and the length 32.

STEP TWO: DEFINE YOUR LINING SIZE

The size of the lining is defined by Width and Length.

*A length of 30 or 32 correlates with a lining length of S.
*A length of 33 to 36 correlates with a lining length of L.

So, if your pants size is 33/32, then your lining size should be 33/S.
If your pants size is 33/34, then your lining size should be 33/L.

Use the chart below to determine your lining size.

• W28/S (Width: 28, Length: 30-32)
• W29/S (Width: 29, Length: 30-32)
• W30/S (Width: 30, Length: 30-32)
• W30/L (Width: 30, Length: 33-36)
• W32/S (Width: 32, Length: 30-32)
• W32/L (Width: 32, Length: 33-36)
• W33/S (Width: 33, Length: 30-32)
• W33/L (Width: 33, Length: 33-36)
• W34/S (Width: 34, Length: 30-32)
• W34/L (Width: 34, Length: 33-36)
• W36/S (Width: 36, Length: 30-32)
• W36/L (Width: 36, Length: 33-36)
• W38/S (Width: 38, Length: 30-32)
• W38/L (Width: 38, Length: 33-36)